• 3 microphone inputs, 2 AUX input and 1 ​recording output
• DD-varieties with 2 phone jacks and 1 5-​pin DIN input
  
• D-varieties with 3 phone jacks
  
• Speaker output of constant voltage ​distribution system (100 V)
  
• Independent tone control of boost and cut ​type for both high and low frequency
  
• MIC 1 with phantom power and mute ​function
  
• Current limiter to prevent damage due to ​current overload
  
• Excess heat limit to protect the transistor ​and power transformer
  
• Available in 30 W, 60 W, 120 W and 240 W ​rated output
  

A high cost-performance ​mixer power amplifier ​suited for broadcasting ​paging or background ​music in schools, offices, ​shops, factories, ​mosques, churches and ​large rooms.

Information

For More Details Message Us on Our Platforms:

For More Details Message Us on Our Platforms:

The sound engineer to ​quality output. This desk ​mount pre-amplifier ​mixer is 1U size and ​comes with 6 ​microphones inputs, 4 ​AUX inputs and 2 ​monaural output to meet ​to all your audio needs.

• Slim & compact 1U size
• 6 microphone inputs, 4 AUX ​inputs and 2 monaural outputs
  
• Remote control contact
  
• Signal noise gate circuit for Mic ​1-5 allowing a signal to pass ​through only when it is above a ​set threshold
  
• Option of desk mount or rack ​mount* (*with optional rack ​mount bracket)
  

For More Details Message Us on Our Platforms:

A 1-DIN size unit 15 W ​car amplifier designed for ​use with a 12 V battery ​car.

• Mobile amplifier for easy ​installation in vehicles
• DC operation from 12 V battery
  
• Rated output 15 W, 30 W or 60 ​W
  
• 2 MIC inputs
  
• AUX input for CD player, radio, ​etc.
  
• Unidirectional dynamic ​microphone with talk switch
  
• Front pause function
  
• DIN size, easy in-dash ​installation
  
• Rugged construction
  

For More Details Message Us on Our Platforms:

A multifunctional amplifier that can be ​mounted in an EIA-Standard ​equipment rack (3-unit size). The unit ​comes with 4 audio inputs including ​the background music input, and the ​speaker output section which has an ​internal attenuator and 5-zone ​selector. It permits not only general-​purpose broadcast, but also ​Emergency Broadcast based on the ​EN60849 Standard which gives pre-​recorded voice instructions (optional ​EV-200M is required) in the ​emergency situation. Broadcast can ​be made from an optional RM-200M ​Remote Microphone as well as from ​the amplifier, and can be remotely ​controlled from external equipment. In ​addition, for 100 V› application the ​unit features the surveillance function ​(optional SV-200MA is required) which ​automatically checks the system for ​failures.

• Programmable system ​management amplifier
• 120 W
  
• 5 switchable high impedance ​speaker zones with adjustable ​attenuators
  
• 9 units can be combined to ​increase the output power and ​number of zones
  
• 4 input channels come with ​volume and bass/ treble control ​on the front panel
  
• Both BGM inputs with level pre-​adjustment
  
• The routing to the zones of the 3 ​microphone/ line level inputs ​and the telephone paging input ​can be pre-set
  
• Emergency power input, remote ​power control, 4 built-in chimes ​etc.
  

For More Details Message Us on Our Platforms:

A hand grip type 15 W megaphone ​with a siren and a removable ​microphone. It can be used as a ​shoulder-type megaphone when the ​microphone is detached. The newly ​developed polyimide diaphragm is ​employed to ensure high sound ​quality.

• Power Source Battery R14P (SUM-2), Size ​"C" × 6 (9 V DC)
• 15 W Rated Output
  
• 23 W Maximum Output
  
• Voice: Approx. 9 hours (JEITA)* Battery ​Life
  
• Approx. 20 minutes (JEITA)* Siren
  
• Siren (sounds at 5 seconds intervals)
  
• Audible Range Voice: Approx. 400 m ​(JEITA)*
  
• Siren: Approx. 500 m (JEITA)*
  
• Polyimide film (voice coil, bobbin)
  
• Operating Temperature -10 °C to +40 °C
  
• Finish Horn: ABS resin, red
  
• Microphone and other: ABS resin, red
  
• Strap: Nylon, black
  
• Dimensions 210 (W) × 291 (H) × 381 (D) mm ​(when attaching the microphone)
  
• Weight Body: 1.15 kg (without batteries ​and microphone)
  
• Microphone: 150 g
  

For More Details Message Us on Our Platforms:

A microphone suited to both vocal ​and speech applications.

• Type Moving coil microphone
• Directivity Unidirectional
  
• Rated Impedance 600 Ω, ​balanced
  
• Rated Sensitivity -54 dB (1 kHz 0 ​dB=1 V/Pa)
  
• Frequency Response 70 - 15,000 ​Hz
  
• Connection Cables Single-core ​shielded cable, unbalanced
  
• Cable Length 10 m
  
• Terminal of Cable Phone plug
  
• Talk Switch Short-off, slide ​switch
  
• Finish Body: Die-cast zinc, ​metallic gray, paint
  
• Head: Steel/zinc-plated steel ​wire, metallic gray, paint
  
• Dimensions φ51 × 170 mm ​(without connection cable)
  
• Weight 245 g (without ​connection cable)
  
• Accessory Microphone holder ​(U5/16)
  

For More Details Message Us on Our Platforms:

A Delegate unit of the TOA conference ​system, TS-680 Series of which ​compact and lightweight design ​makes it easy to install and store. ​Placing the talk key in ON position ​permits speech and disable the ​speaker to prevent feedback. If the ​talk key is placed in the OFF position, ​the microphone cannot be used but ​the speaker is turned on, allowing ​voices from other conference units to ​be monitored. And the TS-682L ​Delegate Unit comes with a long ​microphone as a standard accessory.

• Power Source 36 V DC, 30 mA or less (supplied from ​the Central Unit TS-680)
• Output Headphone/Recording: 32 Ω (headphone)/10 ​kΩ, -20 dB* (recording),
  
• unbalanced, mini jack (with Volume control)
  
• Internal speaker: 130 Ω, 200 mW (with Volume control)
  
• Control Talk Key: Microphone, speaker on-off control ​by talk key
  
• Volume control: Headphone output and internal ​speaker volume adjustable
  
• Microphone Unit
  
• (Accessory) Electret Condenser Microphone
  
• Directivity: Unidirectional
  
• Impedance: 1.8kΩ
  
• Sensitivity: -37dB (1kHz 0dB = 1V/Pa)
  
• Frequency Response: 100Hz - 13 kHz
  
• Length: 518mm
  
• Weight: 105g (0.23 lb)
  
• Operating Temperature 0 °C to +40 °C (32 °F to 104 ​°F)
  
• Operating Humidity 90 %RH or less (no condensation)
  
• Finish ABS resin, black, paint
  
• Dimensions 145.3 (W) × 70.7 (H) × 150.5 (D) mm (5.72" ​× 2.78" × 5.93")
  
• (Excluding Microphone Unit)
  
• Weight 800 g (1.76 lb) (Excluding Microphone Unit)
  
• Accessory Long Microphone Unit x 1
  
• Option Extension cord: YR-780-2M, YR-780-10M
  

For More Details Message Us on Our Platforms:

The speaker is ideal for use in a voice ​alarm system. Can be surface- or ​flush- mounted to the wall. Either ​concealed in-wall wiring or exposed ​wiring can be used for speaker cable ​connection. The speaker structure of ​direct wall-mounting with screws ​prevents the speaker from falling ​easily even if an outward force is ​applied to. The input impedance can ​be easily changed by changing the ​tap position of the transformer. The ​built-in 16 cm double cone speaker ​unit delivers high quality sound. Two ​steatite screw terminal blocks (1 cable ​to 1 connection type) make bridge ​connection easier.

• Robust metal enclosure
• Surface or flush-mounting
  
• High sound quality & sound pressure
  
• Bridge wiring possible
  
• Certified according to EN 54-24
  
• Compliant with BS-5839-8: 2013
  
• Frequency response 150 Hz - 20 kHz
  
• Sensitivity (1 W, 1 m) 94 dB
  
• > 94 dB (1 W, 1 m) (500 Hz – 5 kHz, pink ​noise)
  
• > 77 dB (1 W, 4 m) (100 Hz – 10 kHz, pink ​noise) according to EN 54-24
  
• > 89 dB (1 W, 1 m) (100 Hz – 10 kHz, pink ​noise) converted based on EN 54-24
  
• Speaker component 6" double cone-type
  
• Rated input (high impedance) 6 W (100 V), 3 ​W (70 V)
  
• Dimensions 310 x 190 x 90 mm (W x H x D)
  
• Finish Steel plate, off-white (RAL 9010 or ​equivalent)
  
• Accessory (included) Rubber grommet x 2, ​speaker mounting screw x 4
  

For More Details Message Us on Our Platforms:

Wide range speaker Ideally suited for ​Information broadcast

• Rated Input 10 W (50 V, 70 V, 100 V Line)
• Impedance 100 V Line : 1 kΩ (10 W), 2 kΩ (5 ​W), 4 kΩ (2.5 W)
  
• 70 V Line : 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ ​(2.5W), 4 kΩ (1.25 W)
  
• 50 V Line : 250 Ω (10 W), 500 Ω (5 W), 1 kΩ ​(2.5 W), 2 kΩ (1.25 W),
  
• 4 kΩ (0.63 W)
  
• Sound Pressure Level 92 dB (1 m, 1 W) at 1 ​kHz
  
• Frequency Response 65 Hz - 15 kHz
  
• Speaker Component 12 cm
  
• Finish Cabinet, Cover: ABS Resin, off-white
  
• Bracket: SPCC, off-white
  
• Dimensions 160 (W) x 200 (H) x 195 (D) mm ​(6.3 x 7.87" x 7.68")
  
• Weight 1.8 kg (3.97 lb)
  

For More Details Message Us on Our Platforms:

Outdoor speaker features stainless ​steel hardware for all-weather ​durability. It is designed to offer the ​high intelligibility of weather-resistant ​horns combined with the high sound ​quality of dynamic speakers. The CS-​64 employs the rotary switch that ​facilitates impedance changes.

• Round wide-range speaker for paging, ​background music and tone signaling ​distribution
• Exponential horn improves directivity ​characteristics and ensure uniform and clear ​sound dispersion
  
• Wide temperature range: -20 to +55 °C
  
• Stainless steel hardware protects the speaker ​from corrosion
  
• Rated Input 6 W
  
• Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 ​kΩ (3 W), 10 kΩ (1 W)
  
• 70 V line: 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ ​(1.5 W), 10 kΩ (0.5 W)
  
• Sensitivity 96 dB (1 W, 1 m)
  
• Frequency Response 130 - 13,000 Hz
  
• Speaker Component 12 cm cone-type ​(treated for splash proof)
  
• Speaker Cable 2-core cabtyre cord with ​diameter of 6 mm
  
• Operating Temperature -20℃ to +55℃
  
• Finish Horn, cover: ABS resin, off-white, ​paint
  
• Bracket: Stainless steel
  
• Panched net: Surface treated steel plate, ​dark-gray, powder coating
  
• Screw: Stainless steel
  
• Dimensions 233 (W) x 224 (H) x 208 (D) mm
  
• Weight 1.5 kg
  

For More Details Message Us on Our Platforms:

Integrated with a resin panel and ​speaker frame, the PC-658R is the ​ceiling mount speaker with a metal ​attached. It features spring clamp ​mechanism for easy speaker mounting ​to the ceiling. The input impedance ​can be easily changed by changing ​the tap position of the transformer

• Rated Input 6 W (100 V line), 3 W (70 V line)
• Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 ​kΩ (3 W), 10 kΩ (1 W)
  
• 70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ ​(0.5 W)
  
• Sensitivity 90 dB (1 W, 1 m) (500 Hz - 5 kHz, ​pink noise)
  
• Frequency Response 65 Hz - 18 kHz (peak ​-20 dB)
  
• Speaker Component 16 cm (6") cone-type
  
• Dimensions for Fixing Hole Mounting hole: ​φ170±5 mm (φ6.69"±0.2")
  
• Ceiling thickness: 5 - 25 mm (0.2" - 0.98")
  
• Speaker Mounting Method Spring clamp
  
• Finish Baffle: Polypropylene resin, white (RAL ​9016 equivalent)
  
• Grille: Surface-treated steel plate net, white ​(RAL 9016 equivalent), paint
  
• Dimensions φ192 × 73 (D) mm (φ7.56" × ​2.87")
  
• Weight 500 g (1.1 lb)
  
• Accessory Paper pattern
  

For More Details Message Us on Our Platforms:

A Ceiling Mount Speaker with ​integrated resin panel and speaker ​frame. It feature spring clamp ​mechanism for easy speaker mounting ​to ceiling. The slim speaker frame ​design allows it to blend into the ​interior design of the application ​easily. Input impedance can be easily ​adjusted by changing the tap of the ​transformer.

• Rated Input 15 W (100 V, 70 V line)
• Impedance Option 100 V line: 670 Ω (15 W), 1 ​kΩ (10 W), 2 kΩ (5 W), 3.3kΩ (3 W)
  
• 70 V line: 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ ​(5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W)
  
• Sensitivity 96 dB (Pink Noise 500 Hz - 5,000 ​Hz / 1W, 1m)
  
• Frequency Response 65 Hz - 20,000 Hz (at 20 ​dB below peak SPL)
  
• Speaker Component 20 cm (8") double cone-​type
  
• Dimensions for Fixing Hole Mounting hole: ​Φ250±5 mm (Φ9.84"±0.2")
  
• Ceiling thickness: 5 - 25 mm (0.20" - 1.98")
  
• Speaker Mounting Method Spring clamp
  
• Finish Panel: Polypropylene resin, traffic ​white (RAL 9016 equivalent)
  
• Grille: Surface-treated steel plate net, traffic ​white (RAL 9016 equivalent), paint
  
• Dimensions Φ280 × 90 (D) mm (11.02" × ​3.54")
  
• Weight 0.96 kg (2.12 lb)
  
• Accessory Paper pattern
  

For More Details Message Us on Our Platforms:

A compact, highly intelligible speaker ​suited to public address ​announcement applications. Its ​external speaker component finished ​with powder coating, and stainless-​steel bracket and screws ensure the ​unit's weatherproof capability.

• Very rugged speaker with durable construction ​ensures long term reliable operation
• High quality sound
  
• High SPL
  
• Easy impedance selection through switch
  
• High impedance 100 V line
  
• Shock resistant oval horn
  
• Rated Input 10 W
  
• Rated Impedance 100 V line: 1 kΩ (10 W), 2 kΩ (5 ​W), 3.3 kΩ (3 W), 10 kΩ (1 W)
  
• 70 V line: 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W),
  
• 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
  
• Sound Pressure Level 110 dB (1 W, 1 m at 500 Hz ​to 2.5 kHz peak level)
  
• Frequency Response 315 Hz - 12.5 kHz
  
• Polarity Hot: Black, Com: White
  
• Dust/Water Protection IP65
  
• Operating Temperature -20 °C to +55 °C (-4 °F to ​131 °F) (must be free from dew condensation)
  
• Finish Horn flare: Aluminum, off-white, powder ​coating
  
• Reflector horn and rear cover: ABS resin, off-​white
  
• Bracket, screws and bolts: Stainless steel
  
• Speaker cable: Polyvinyl chloride insulated cabtyre ​cable
  
• (6 mm in diameter, 600 mm in length)
  
• Dimensions 172 (W) x 161 (H) x 188 (D) mm
  
• Weight 1.2 kg
  

For More Details Message Us on Our Platforms:

Equipped with an electronic chime. It ​can be operated as easily as normal ​type microphones, and can be used in ​any locations. The EC-100M's power ​saving design permits it to be ​operated for approximately 2 years ​(on the assumption that it is used 150 ​times a day) on two R14P batteries. (It ​is highly recommended that the ​batteries be replaced every 2 years to ​avoid battery leakage.)

• Power Source 3 V DC (R14P × 2)
• Current Consumption 2 mA during ​chime and microphone operation
  
• 10 μA at no operation
  
• Chime Tones 4-tone chime ​(up/down)
  
• Microphone Unidirectional dynamic ​type
  
• Microphone Frequency Response 200 ​Hz - 10 kHz
  
• Chime signal -45 dB*, 600 Ω, ​unbalanced (chime volume control set ​to maximum position)
  
• Microphone -53 dB, 600 Ω, ​unbalanced (1 kHz, 0 dB = 1 V/Pa)
  
• Finish Case: Zinc die casting, metallic ​gold
  
• Weight 605 g
  
• Accessory Connection cord (2 m) ……​1, Slotted-head screwdriver……1, ​Windscreen……1
  

For More Details Message Us on Our Platforms:

Can produce effective acoustic ​sounds in commercial spaces like ​restaurants, cafés and retail stores. ​There are 4 small satellite speakers ​that conform to the design of the ​commercial space and can be ​installed using metal fittings ​attachemnts to produce suitable ​acoustiv sounds even in complex ​spaces. The subwoofer, which can be ​temporarily or permanent installed, ​are capable of reinfording the ​projection of ideal sounds.

• Consists of a set of 4 satellite speakers and a ​subwoofer, which are individually fitted with its ​own mounting brackets
• Compact and highly efficient in performance
  
• The mounting brackets fitted onto the satellite ​speakers can be for 1 speaker or 2 speakers ​installation
  
• Frequency response 40 Hz - 20 kHz
  
• Sensitivity (1 W, 1 m) 81 dB x 2 channels
  
• Speaker component
  
• Subwoofer: 16 cm cone-type x 2 channels, 210 (W) ​x 390 (H) x 563 (D)
  
• Satellite Speaker: 8 cm cone-type x 2 channels, 92 ​(W) x 97.5 (H) x 100 (D)
  
• Rated impedance 4 Ω
  
• Rated input (low impedance)
  
• Continuous program: 160 W x 2 channels
  
• Continuous pink noise: 80 W x 2 channels
  
• Measured in a set configuration of a subwoofer (L ​or R channel) and 2 satellite speakers
  
• Finish
  
• HIPS resin, black (RAL 9011 or equivalent)
  
• Accessory (included)
  
• Subwoofer mounting bracket (black) x 4, Rubber ​foot and fixing screw for subwoofer x 4, Subwoofer ​mounting screw x 4, Satellite speaker mounting ​bracket (black) x 6, Satellite speaker mounting ​screw x 8, Sticker for satellite speaker (black) x 8
  

For More Details Message Us on Our Platforms:

A splashproof wall-mounted speakers ​employing a splashproof 10 cm ​fullrange speaker. Applications of ​these speakers include uses at ​outdoor locations under eaves which ​can avoid direct water splash and at ​highly humid locations including ​locker rooms of shower rooms, ​swimming pools, and bath rooms. ​Because the BS-10WL is magnetically ​shielded, it does not have any adverse ​effect on television sets even when it ​is installed in close proximity to them.

• Category: Paging System
• Description
  
• Type Sealed type
  
• Speaker 10cm dynamic speaker
  
• Rated Power 5W
  
• Impedance 2k Ω (5W), 3.3k Ω (3W), 5k ​Ω (2W)
  
• Output Sound Pressure Leve 90dB / W ​/ M
  
• Frequency Response 120 ~ 18,000Hz
  
• Operating Temperature Range -20 ~ ​+55°C
  
• Speaker Component 12cm dynamic ​cone type speaker
  
• Finish Enclosure; Polypropylene, Grey / ​Grill; Aluminium, Grey.
  
• Dimensions (W x H x D) 198 x 177 x ​159mm
  
• Weight 1.4kg
  

For More Details Message Us on Our Platforms:

Made of wood, can be installed in a ​vertical or horizontal orientation. ​Either concealed in-wall wiring or ​exposed wiring can be used for ​speaker cable connection. The ​speaker structure that permits direct ​wall-mounting with screws prevents ​the speaker from falling easily even if ​an outward force is applied to. The ​input impedance can be easily ​changed by changing the tap position ​of the transformer. Two built-in 6-inch ​double cone speaker units deliver ​high quality sound. The push-in type ​input connector makes cable ​connections easy and allows bridge ​wiring

• Category: Paging System
• Description
  
• Rated Input 6 W (100 V line), 3 W (70 V line)
  
• Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ ​(3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
  
• 70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 ​W), 13 kΩ (0.4 W)
  
• Sensitivity 94 dB (1 W, 1 m) (500 Hz – 5 kHz, pink ​noise)
  
• Frequency Response 150 Hz – 20 kHz (peak -20 ​dB)
  
• Speaker Component 16 cm (6″) double cone-type
  
• Applicable Cable 600 V vinyl-insulated cable (IV ​wire or HIV wire)
  
• Solid wire: φ0.8 – φ1.6 mm (equivalent to AWG 20 ​– 14)
  
• 7-core twisted wire: 0.75 – 1.25 m㎡ (equivalent to ​AWG 18 – 16)
  
• Connection Push-in connector (bridging terminal)
  
• Finish Baffle: HIPS, off-white (RAL 9010 or ​equivalent color)
  
• Cabinet: Particle board with pvc sheet, off-white ​(RAL 9010 or equivalent color)
  
• Grille: Surface-treated steel plate net, off-white ​(RAL 9010 or equivalent color)
  
• Dimensions 250 (W) × 190 (H) × 110 (D) mm (9.84″ ​× 7.48″ × 4.33″)
  
• Weight 1.7 kg (3.75 lb)
  
• Accessory Speaker mounting screw (4 × 35 (0.16″ ​× 1.38″))
  

For More Details Message Us on Our Platforms:

Can be mounted (exposed installation) ​to the ceiling where flush mounting is ​impossible. It can be easily installed ​thanks to its spring catch method. ​Push-in connector allows quick wire ​connection, and speaker lines can be ​bridged by bridging terminals. The ​supplied bracket can be mounted to a ​flush-mount pull box.

• Category: Paging System
• Description
  
• Rated Input 6 W (for 100 V Line), 3 W (for 70 V ​Line)
  
• Rated Impedance 100 V Line: 1.7 kΩ (6 W), 3.3 kΩ ​(3 W),
  
• (6.7 kΩ (1.5 W), 13 kΩ (0.8 W): Internal wiring must ​be changed)
  
• 70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W),
  
• (6.7 kΩ (0.8 W), 13 kΩ (0.4 W): Internal wiring must ​be changed)
  
• Sound Pressure Level 90 dB (1 W, 1 m, 330 Hz – ​3.3 kHz Pink noise)
  
• Frequency Response 100 Hz – 16 kHz
  
• Speaker Component 12 cm dynamic cone-type ​speaker
  
• Speaker Mounting Method Spring catch
  
• Applicable Cable
  
• 600 V Vinyl-insulated cable (IV wire or HIV wire)
  
• Solid copper wire: φ0.8 – φ1.2 mm
  
• 7-core twisted copper wire: 0.75 – 1.25 m㎡
  
• Connection Push-in connector (Bridging terminal-2 ​branch type)
  
• Finish Baffle: ABS resin, off-white (RAL 9010 or ​equivalent color)
  
• Dimensions φ260 × 92 (D) (Exposed section) mm
  
• Weight 820 g (Bracket included)
  

For More Details Message Us on Our Platforms:

Can easily be attached to the CM-760 ​speaker by means of coil springs. ​Because it is thin in thickness and ​white in color, it blends with any ​ceiling. In addition, cleaning is easy ​because the net is painted metal.

• Category: Paging System
• Description
  
• Speaker Mounting Method Spring catch
  
• Finish Frame: ABS resin, off-white
  
• Net : Aluminum, off-white, paint
  
• Dimensions φ180 × 11 (D) (Exposed section) mm
  
• Weight 70 g
  
• Applicable Speaker CM-760, CM-76
  

For More Details Message Us on Our Platforms:

A flush-mounted wall attenuator and ​uses a transformer which allows ​connection of a wide range of loads (6 ​W or less). Volume can be adjusted in ​five steps. The AT-063AP features ​push-in terminal block for easy ​connection.

• Category: Paging System
• Description
  
• Input Range 0.5 W – 6 W
  
• Attenuation 5 steps (0 dB, -6 dB, -12 dB, -18 dB, ​OFF)
  
• Applicable Cable 600 V vinyl-insulated cable ​(Indoor Vinyl or Heat-resistant Indoor Vinyl cable)
  
• Solid cable: φ0.8 (0.03″) – φ1.6 (0.06″) mm
  
• Terminal Push-in connector
  
• Finish Knob, panel, plate: ABS resin, white (RAL ​1013 equivalent)
  
• Case: ABS resin, black
  
• Dimensions 70 (W) × 120 (H) × 52.4 (D) mm (2.76″ ​× 4.72″ × 2.06″) (with plate)
  
• 41 (W) × 108 (H) × 52.4 (D) mm (1.61″ × 4.25″ × ​2.06″) (atte nuator only)
  
• Weight 170 g (0.37 lb) (unit only)
  
• Accessory Plate …1, Plate mounting screw …2, ​Box mounting screw …2
  
• Applicable Plate YP-1AF (option)
  
• Applicable Box YS-11A (option)