Red FACP 1-Loop w/eNET Network Card AS0815-10

Description

Added Features:

  • eNet networking card pre-installed (one required per node).
  • Construction: 16AWG sheet steel
  • Dimensions: 14.5”W x 18.9”H x 4.25” D
  • Weight (without batteries): 20lb
  • Mains voltage supply: 115 or 230V AC 50 or 60 Hz.(specify when ordering, default is 115V)
  • Mains supply fuse: 1.6A 250V
  • Power supply DC rating: 24V 5.25 Amps
  • Aux 24V supply: Fused at 500 milliamps
  • Battery (24 hour standby): 9Ah 12V (2 per panel) (non-networked)
  • Fault contact rating: 30V DC 1 Amp
  • Fire contact rating: 30V DC 1 Amp
  • Alarm contact rating: 30V DC 1 Amp
  • NAC output rating: 3.1V across both channels, 2.3V across any one
  • Detection loop: 250 milliamp output
  • Serial expansion port: Serial RS485
  • PC port: Serial RS232
  • Network connection: Optional network Cards allow the use of e-Net networking or VESnet networking
  • NAC Synchronization: Internal Support
  • NAC Protocols: System Sensor, Wheelock, Gentex, Amseco

Leave a Reply