Current Loop 1 Sensor (50A)

Current Loop 1 Sensor (50A)

AVTECH’s Current Loop 1 Sensor (50A) monitors the electrical current flowing through a single-phase powered cable. It outputs a signal of 0 to 5 VDC (volts of direct current), which your built-in or external Room Alert Analog Sensor Port then converts into an amp (A) reading. By pairing a Current Loop with your Room Alert monitor, you can easily determine the power consumption of an electrical appliance or device at your facility. The Current Loop can be easily moved to various appliances as needed and will help you monitor power consumption to determine if a power drop might be causing a problem or if an appliance is drawing too much power. The cost of electricity is one of the fastest growing costs and concerns for IT managers so knowing that a problem exists is the first step in resolving the problem.

null

AVTECH’s Current Loop 1 Sensor monitors the electrical current flowing through a single-phase powered cable. It outputs a signal of 0 to 5 VDC (volts of direct current), which your built-in or external Room Alert Analog Sensor Port then converts into an amp (A) reading. A current flow sensor paired with your Room Alert monitor, can be easily be used as an energy consumption monitor of an electrical appliance or device at your facility. The Current Loop can be easily moved to various appliances as needed and will help you monitor power consumption to determine if a power drop might be causing a problem or if an appliance is drawing too much power. The cost of electricity is one of the fastest growing costs and concerns for IT managers so knowing that a problem exists is the first step in resolving the problem.

QUESTIONS? Call us at 239-9401 or send us an email at info@aa2000ph.com/customersupport@aa2000ph.com.

Protect Your Facility… Don’t Wait Until It’s Too Late! Remember, ‘Proactive Monitoring’ is always better than ‘Disaster Recovery’.

Features & Specification For The Current Loop 1 Sensor

Current Loop 1 Sensor

Environment Condition Monitored
Type Of Sensor
Power Supply
Included Sensor Cable Type
Included Sensor Cable Length
Maximum Sensor Cable Length
Output Voltage
Input Amperage Range
Accuracy
Response Time
Operating Frequency Range
Isolation Voltage
Maximum Sensing Current Voltage
Aperture (Hole) Size
DIN Rail Size
Operating Temperature Range
Operating Humidity Range
Enclosure Rating
Compatible Products

Electrical current (amps)
Switch
Induced from monitored conductor
Low-voltage 2-wire speaker cable
25′
100′
0 to 5 VDC
0 to 50 A
+/- 1.0% (5 to 100% FSO)
< 100 mS
50 to 600 Hz
2,200 VAC
600 VAC
0.75″ (Accepts cables up to 350 MCM)
35 mm
-15 to 40º C (5 to 104º F)
0 to 95% RH, non-condensing
UL94-5VB
Room Alert Analog Sensor Port (built-in or external)

The AVTECH Current Loop 1 Sensor (50A) Includes:

(1) Current Loop 1 Sensor (50A)
(2) #8 x ¾” TEK mounting screws
(1) 25′ speaker wire cable
Installation Note & Instruction Sheet
90-Day Warranty & Replacement Guarantee
AVTECH’s many years of experience since 1988